Removing Spray Foam Insulation: Why, When and How It Is Done
Spray foam insulation can be removed, and in most homes the roof can be put back into a condition that can be inspected and maintained. This guide explains why homeowners have it taken out, how to tell whether yours needs to go, and what the work involves. It applies to homes in England and Wales, which is the area Countrywide Roofing and Insulation covers.
Why spray foam gets removed
The reasons we hear most often are these.
- A sale or remortgage has stalled. Spray foam can restrict inspection of the roof timbers. Lending decisions depend on the lender's policy and the assessment of the individual property, so some owners are asked about the foam before a transaction can move on.
- Moisture and ventilation. Foam that seals a roof space too tightly can reduce airflow. Where moisture then builds up, it can lead to condensation, mould and, over time, damage to timber.
- Roof repairs or replacement. Foam bonds to whatever it was sprayed on. A roofer often cannot reach a leak, the felt or the battens until it has been cleared.
- Poor installation. Uneven coverage, foam over vents or wiring, and foam that has cracked or pulled away are all signs the original job was not done well.
- Plans for the loft. A conversion or other work in the roof space is easier to design and inspect once the foam is out.
Not every roof with spray foam needs it removed. The risk depends on the roof construction, the product used, how it was installed, and whether moisture is present. That is why the first step is always to look at the roof itself.
Open-cell and closed-cell foam
The two types behave differently and are removed differently.
Open-cell foam is soft and spongy. It can be cut and pulled away from the timbers more readily, though it still has to be cleared carefully from every rafter. See our open-cell spray foam removal page.
Closed-cell foam is dense and rigid and grips the surface it was sprayed on. Where it is bonded to the roofing felt, we remove the tiles to deal with it, and the tiles can usually be saved. Where it was sprayed directly onto the tiles, new tiles are needed. See our closed-cell spray foam removal page.
If you are not sure which you have, our guide to open-cell and closed-cell spray foam explains how to tell them apart.
Signs it may be time to remove it
- A lender, valuer or your buyer's surveyor has raised the foam as a concern
- Damp patches, condensation or a musty smell in the loft
- Foam that is cracked, shrinking or coming away from the timbers
- Foam covering vents, wiring or pipework
- A roof problem that cannot be traced because the foam hides it
One of these on its own does not prove the foam has to go, but each is a reason to have the roof looked at.
How removal is carried out
- Free estimate. One of our estimators inspects the loft, identifies the foam type and how it was applied, and checks the visible condition of the timbers and felt. You receive a written quote.
- Preparation. The loft and the access route through the house are protected before work starts.
- Removal. Open-cell foam is removed by hand with tools. With closed-cell foam we re-roof: the tiles come off, the foam is removed and the roof is re-laid.
- Clean-up and check. Debris is cleared and taken away, and the exposed timbers and felt are checked again now that they can be seen.
- Repairs and insulation. If the roof needs work once the foam is off, we can carry it out, and the loft can be re-insulated. See our loft insulation service.
- Documentation. You receive documentation recording the work carried out. Where a mortgage lender is involved, our in-house team prepares a written report for the lender. Acceptance remains the lender's decision.
Our teams are directly employed, with no sub-contracted labour. Countrywide are members of CORC.
Can I remove it myself?
We do not recommend it. Foam is bonded to the timbers and felt, so cutting or prising it off can damage them, and working in a roof space carries its own risks. Our guide on removing spray foam insulation yourself covers this in detail.
What affects the cost
There is no single price, because the work varies from roof to roof. The main factors are:
- the type of foam, open-cell or closed-cell
- the size of the roof and how much foam was applied
- how easy the loft is to reach and work in
- whether the roof needs repair once the foam is removed
For typical figures, see our spray foam removal cost guide.
Spray foam and mortgages
Spray foam does not automatically prevent a mortgage. Lenders set their own policies and look at each property individually. Removal does not guarantee a lending decision either. What it does is allow the roof to be inspected, and gives you a record of the work to pass to your lender, surveyor or solicitor. Our guide to mortgage lenders and spray foam goes into more detail.
Frequently asked questions
Can spray foam insulation be removed?
Yes. Both open-cell and closed-cell foam can be removed, though closed-cell foam means re-roofing.
How long does it take?
Most jobs take between one and five days, depending on the type of foam and the size of the roof.
Will removal damage my roof?
The work is planned to protect the timbers and felt. Where the foam has already affected the roof, that is usually found once it is cleared, and we will explain what we find.
Do you use dry ice blasting?
No. We do not use dry ice blasting, because of the damage it can do to a roof.
What goes in its place?
We re-insulate the loft with Knauf mineral wool laid to the correct depth, or with Actis Hybris, depending on the roof.
How do I choose a removal company?
See how to choose a spray foam removal company.
Arrange a free estimate
If you would like your roof looked at, visit our spray foam removal page or call 0808 503 4084. We work across England and Wales.
By accepting you will be accessing a service provided by a third-party external to https://countrywideinsulation.co.uk/
